Not sure what something is? Tap it to see a picture.

• Microfiber towels
• Applicator pad or sponge
• Masking tape (optional)
• 600-grit or higher sandpaper (optional)
• Fine-tipped paintbrush (optional)

• Car wash soap
• Car scratch remover compound or polish
• Automotive touch-up paint (color-matched to vehicle code)
• Car wax

1. 1.Wash the scratched area thoroughly with soap and water to remove all dirt and debris.
2. 2.Dry the area completely using a clean microfiber towel.
3. 3.Apply a small amount of scratch remover compound to an applicator pad.
4. 4.Rub the compound over the scratch using overlapping circular motions with moderate pressure for about sixty seconds.
5. 5.Allow the product to dry to a haze and remove it with a fresh, soft microfiber towel.
6. 6.Use masking tape to outline the area if the scratch is deep and requires touch-up paint.
7. 7.Apply a thin layer of color-matched touch-up paint to the deep scratch using a fine-tipped brush.
8. 8.Allow the paint to dry completely according to the manufacturer instructions.
9. 9.Apply a coat of car wax over the repaired area to seal and protect the finish.