How to Build a Shed: Step-by-Step Guide
Learn how to build a shed with this simple guide. Follow our step-by-step instructions to construct your own outdoor storage building safely.
- •Tape measure (25–30 ft)
- •Circular saw
- •Power drill/driver
- •Hammer
- •Level (48 inch)
- •Carpenter's square
- •Impact driver (optional)
- •Nail gun (optional)
- •Chalk line (optional)
- •Pressure-treated 4x4 or 4x6 skids for foundation
- •Crushed gravel for base
- •Concrete blocks
- •2x4 lumber for wall framing and rafters
- •OSB or plywood sheets for floor and roof decking
- •Exterior-grade screws and galvanized nails
- •Roofing felt and asphalt shingles
- •Drip edge flashing
- •Pre-hung shed door or door hardware kit
Tell FigsiT your exact setup and get your personal tools list, materials, and steps in seconds.
Step-by-Step Instructions
- 1.Check local building codes and permit requirements for your area before starting construction.
- 2.Clear and level the ground site to ensure a stable foundation for the shed.
- 3.Lay down landscape fabric and crushed gravel followed by concrete blocks or a pressure-treated frame to create a level base.
- 4.Construct the floor frame using pressure-treated lumber and attach the floor decking.
- 5.Build the wall frames on the ground and raise them into position on the floor deck.
- 6.Secure the wall frames to the floor and to each other to ensure the structure is square.
- 7.Install the rafters across the top of the walls to create the roof structure.
- 8.Attach the roof sheathing to the rafters and cover with roofing felt and shingles.
- 9.Install the door frame and hang the door to secure the shed.
- 10.Apply exterior cladding and trim to protect the structure from the elements.
Part of The FigsiT DIY Bible. Browse every guide by category.