Build a Simple Garage Workbench: Step-by-Step Guide

Learn how to build a simple workbench for your garage with this easy step-by-step guide. Perfect for DIY enthusiasts!

Home & DIY

FigsiT Project Rating

Take care

Saws cause most injuries on this job. Clamp boards before cutting, keep hands clear of the blade, and unplug the saw before changing blades.

Safety gear: Safety glasses, Hearing protection, Dust mask, Work gloves (not while running the saw)

Tools Required (10)

Not sure what something is? Tap it to see a picture.

Materials Needed (9)

Tell FigsiT your exact setup and get your personal tools list, materials, and steps in seconds.

1.
Measure and cut four 2x4 boards to 30 inches for the legs.
2.
Cut four 2x4 boards to 48 inches for the side aprons.
3.
Cut four 2x4 boards to 24 inches for the end aprons.
4.
Cut four 2x4 boards to 21 inches for the supports.
5.
Cut one 3/4-inch plywood sheet to 48x48 inches for the tabletop.
6.
Cut one 3/4-inch plywood sheet to 48x24 inches for the bottom shelf.
7.
Cut one 1/2-inch plywood sheet to 48x24 inches for the middle shelf.
8.
Assemble the frame by attaching the side aprons to the legs using wood glue and 2-1/2-inch wood screws.
9.
Attach the end aprons to the legs, ensuring the frame is square.
10.
Install the supports between the legs, positioning them 4 inches from the bottom to create a lower shelf.
11.
Attach the bottom shelf to the supports using wood glue and 1-1/4-inch wood screws.
12.
Position the middle shelf between the bottom shelf and the tabletop, securing it with wood glue and 1-1/4-inch wood screws.
13.
Place the tabletop onto the frame, centering it, and attach it using wood glue and 2-1/2-inch wood screws.
14.
Sand all surfaces smooth to prepare for finishing.
15.
Apply wood stain or paint to all surfaces, allowing adequate drying time.
16.
Attach the heavy-duty swivel plate casters with brakes to the bottom of the legs for mobility.
17.
Ensure all components are securely fastened and the workbench is stable before use.