How to Fix a Cracked Tile: Step-by-Step Guide

Repair a cracked tile with clear epoxy, tile paint, and a sealer. Tools, materials, and step-by-step instructions.

Home & DIY

FigsiT Project Rating

Take care

Breaking out a tile throws sharp shards, so wear safety glasses and gloves and keep others out of the room.

Safety gear: Safety glasses, Work gloves, Dust mask

Tools Required (5)

Not sure what something is? Tap it to see a picture.

Materials Needed (4)

Tell FigsiT your exact setup and get your personal tools list, materials, and steps in seconds.

1.
Clean the cracked tile and surrounding area thoroughly to remove any dirt or debris.
2.
Mix the two-part clear epoxy according to the manufacturer's instructions.
3.
Using a toothpick, apply the mixed epoxy into the crack, filling it completely.
4.
Allow the epoxy to cure as per the manufacturer's recommended time.
5.
Once cured, lightly sand the repaired area with fine-grit sandpaper to smooth it out.
6.
Paint over the repaired crack with a matching tile paint using a small paintbrush.
7.
After the paint dries, apply a clear urethane sealer over the repaired area to protect the finish.