How to Re-Grout Tiles: Step-by-Step Guide
Learn how to effectively re-grout your tiles with our step-by-step guide. Perfect for DIY enthusiasts!
- •18V cordless drill
- •14mm socket wrench
- •3/8-inch drill bit
- •Phillips #2 screwdriver
- •Grout removal tool
- •Grout float
- •Rubber grout float
- •Grout sponge
- •Utility knife
- •Grout finisher
- •5-gallon bucket
- •Mixing stick
- •Measuring cup
- •Sponge
- •Clean cloths
- •Grout sealer
- •Unsanded grout (quantity based on area size)
- •Sanded grout (quantity based on area size)
- •Grout sealer (quantity based on area size)
Tell FigsiT your exact setup and get your personal tools list, materials, and steps in seconds.
Step-by-Step Instructions
- 1.Remove the existing grout using a grout removal tool, taking care not to damage the surrounding tiles.
- 2.Clean the tile surface with a damp sponge to remove any dust and debris.
- 3.Mix the new grout according to the manufacturer's instructions until it reaches a smooth, lump-free consistency.
- 4.Apply the grout to the joints using a grout float, pressing it firmly into the spaces between tiles.
- 5.Remove excess grout from the tile surface with the edge of the grout float held at a 45-degree angle.
- 6.Wait for the grout to set slightly, then use a damp sponge to wipe away any remaining grout haze from the tiles.
- 7.Allow the grout to cure for the time specified by the manufacturer, typically 24 to 72 hours.
- 8.Once cured, apply a grout sealer to protect against moisture and stains, following the product's instructions.
- 9.Buff the tiles with a clean, dry cloth to remove any residual haze and achieve a polished finish.
Part of the FigsiT-Powered DIY-Bible