Step-by-Step Guide to Install a Door Sweep

Learn how to easily install a door sweep with our comprehensive guide. Perfect for enhancing automotive door seals!

Home & DIY

FigsiT Project Rating

DIY-friendly

A simple job. Cut away from your body with the utility knife, and wear safety glasses when drilling or cutting metal.

Safety gear: Safety glasses, Work gloves

Tools Required (5)

Not sure what something is? Tap it to see a picture.

Materials Needed (2)

Tell FigsiT your exact setup and get your personal tools list, materials, and steps in seconds.

1.
Measure the width of your door to determine the appropriate length for the door sweep.
2.
If necessary, cut the door sweep to match the door's width using a hacksaw.
3.
Close the door and position the door sweep along the bottom edge, ensuring it makes contact with the threshold.
4.
Mark the screw hole locations on the door through the holes in the door sweep.
5.
Drill 1/8-inch pilot holes at the marked locations to prevent splitting the door.
6.
Attach the door sweep to the door using screws, ensuring it is securely fastened.
7.
Open and close the door to verify that the door sweep seals properly without hindering movement.