Re-Grout Your Tiles: A Complete DIY Guide

Learn how to effectively re-grout your tiles with our step-by-step DIY guide for a fresh look in your home.

Home & DIY

Tools Required (5)

Materials Needed (2)

Tell FigsiT your exact setup and get your personal tools list, materials, and steps in seconds.

1.Remove the old grout using a grout removal tool, taking care not to damage the tiles.
2.Clean the tile surface with a damp sponge to remove any dust and debris.
3.Mix the new grout according to the manufacturer's instructions until it reaches a smooth consistency.
4.Apply the grout to the joints using a grout float, pressing it firmly into the spaces between tiles.
5.Remove excess grout from the tile surface with the edge of the grout float held at a 45-degree angle.
6.Wait for the grout to set slightly, then use a damp sponge to clean the tile surface, being careful not to remove grout from the joints.
7.Allow the grout to cure for the time specified by the manufacturer, typically 24 to 72 hours.
8.Once cured, apply a grout sealer to protect against moisture and stains, following the product's instructions.
9.Buff the tile surface with a clean, dry cloth to remove any remaining haze and achieve a polished finish.