Kitchen Faucet Sprayer Replacement Guide: Easy Steps

Learn how to easily replace your kitchen faucet sprayer with our step-by-step guide. Save time and money with DIY tips!

Home & DIY

FigsiT Project Rating

DIY-friendly

Shut off the water valves under the sink and open the faucet to release pressure before you take anything apart.

Safety gear: Safety glasses, Flashlight

Tools Required (5)

Not sure what something is? Tap it to see a picture.

Materials Needed (2)

Tell FigsiT your exact setup and get your personal tools list, materials, and steps in seconds.

1.
Turn off the water supply at the shut-off valves under the sink.
2.
Open the faucet to drain any remaining water.
3.
Use the adjustable wrench to disconnect the water supply lines from the faucet.
4.
Use the Phillips #2 screwdriver to remove the mounting screws securing the faucet to the sink.
5.
Lift the faucet out of the sink.
6.
Apply a 1/4-inch bead of plumber's putty around the base of the new faucet sprayer.
7.
Insert the sprayer into the mounting hole in the sink.
8.
From underneath the sink, place a friction washer over the tailpiece of the sprayer.
9.
Screw the mounting nut onto the tailpiece and tighten it with the basin wrench or slip-joint pliers.
10.
Attach the sprayer hose to the faucet's hose nipple and tighten it by hand.
11.
Use the adjustable wrench to tighten the hose connection an additional quarter turn.
12.
Turn the water supply back on and check for leaks.
13.
Test the sprayer to ensure it operates correctly.