How to Install a GFI Outlet in a Bathroom (Electrical Safety)

If you are looking for how to install a GFI outlet in a bathroom, this electrical safety guide is essential. A GFI outlet (Ground Fault Circuit Interrupter) is required in wet areas to prevent electric shock.

Tools and Materials Needed

You will need a screwdriver, wire strippers, a non-contact voltage tester, and the new GFI outlet.

Step-by-Step Guide to GFI Wiring

1.Safety First: Turn off the power to the circuit at the breaker and confirm the power is off with your voltage tester.

2.Identify Wires: Identify the line wires (coming from the breaker) and the load wires (going to the next outlet).

3.Connect the GFI: Connect the line wires to the "Line" terminals and the load wires to the "Load" terminals. Connect the ground wire to the green screw.

4.Install and Test: Screw the GFI outlet into the box. Restore power and press the "Test" button on the outlet. It should trip, cutting the power.

5.This electrical project is a critical home improvement for safety.

“Still stuck? FigsiT can walk you through this step-by-step based on your exact situation.”
[Try FigsiT →]