How to Replace a Deadbolt Lock (Door Security)

Knowing how to replace a deadbolt lock yourself is a simple DIY deadbolt project that significantly enhances door security. This lock replacement is a quick home improvement.

Tools and Materials Needed

You will need a screwdriver and the new deadbolt lock.

Step-by-Step Guide to Deadbolt Installation

1.Remove the Old Lock: Remove the two screws holding the interior side of the deadbolt lock in place. Remove the interior and exterior cylinders. Remove the latch mechanism from the edge of the door.

2.Install the New Latch: Insert the new latch mechanism into the door edge and secure it with screws.

3.Install the Cylinders: Insert the exterior cylinder, followed by the interior cylinder, ensuring the tailpiece is correctly aligned with the latch.

4.Secure the Lock: Screw the two long screws through the interior cylinder and into the exterior cylinder.

5.Adjust the Strike Plate: Check the strike plate on the door frame. If the new lock doesn't align, you may need to adjust or replace the plate.

This simple installation is a vital security upgrade for your home.

“Still stuck? FigsiT can walk you through this step-by-step based on your exact situation.”
[Try FigsiT →]