How to Repair a Cracked Concrete Driveway (Exterior Maintenance)

If you are looking for how to repair a cracked concrete driveway yourself, this DIY concrete guide is essential for exterior maintenance. Fixing cracked driveway issues quickly prevents further damage and costly concrete resurfacing.

Tools and Materials Needed

You will need a wire brush, a vacuum, a caulk gun, and concrete crack filler or sealant.

Step-by-Step Guide to Concrete Repair

1.Clean the Crack: Use the wire brush to remove all loose debris, dirt, and old sealant from the crack. Vacuum the crack thoroughly.

2.Apply Filler: Use the caulk gun to apply the concrete crack filler deep into the crack. Do not overfill; the filler should be slightly below the surface.

3.Smooth and Cure: Use a trowel or putty knife to smooth the filler flush with the concrete slab. Allow the filler to cure according to the manufacturer's instructions.

4.Seal the Area: Once cured, you can apply a concrete sealant over the entire area for added protection.

5.This simple repair is a great home maintenance task that protects your driveway maintenance investment.

“Still stuck? FigsiT can walk you through this step-by-step based on your exact situation.”
[Try FigsiT →]